1b) Use the lock slider to lock the connector in place.Ģ) Plug the yellow cable connector into the power supply port. 1a) Plug the yellow cable connector into the port. 2) Connect the other blue cable connector into an open port on your router.ġ) Remove the hatch from the back of the camera. 1a) Then, plug the network adapter into the power outlet. When prompted to plug in the network adapter: 1) Plug one end of the blue cable connector into the network adapter. ![]() The network adapter and power supply must be plugged directly into your wall outlet. Surge protectors are built-in to the network adapter and power supply and protect the cameras. Network Adapter / Power Supply Install Noteĭo NOT plug the network adapter or power supply into a surge protector or power strip as they interfere with the cameras. The installer will check for the latest version of the software.Īlternatively, you can download the latest version at 2) You may be asked to reboot the PC.ģ) Logitech Alert Commander software will open.Ĥ) The First Run Wizard will guide you through the next steps of setup.Be sure to comply with the laws in your country, state, and locality when using Logitech Alert products and services.ġ) Insert the Software Install CD and follow the instructions during the If prompted to allow Logitech Alert access to the network, you should always answer “Yes” or “Allow.”Ĭertain uses of security camera products and audio devices, such as employee monitoring, surreptitious viewing and recording of images and/or audio, or the use, publication or distribution of image and/or audio recordings, are prohibited or restricted by country, state and local laws. 2) During installation, we will test your PC’s firewall settings. 1) Read all instructions before beginning the installation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |